# 雲形線
「雲形線」工具可讓您在空間或其他物件上建立有機的草圖。
雲形線至少從 3 個內插點繪製。連接的幾何圖形會加以簡化，以在指定點之間建立平滑且有機的曲線。與其他繪製工具一樣，雲形線可以在繪製時鎖點至 3D 點，以 3D 繪製。
若要指定距離，請開始鍵入尺寸值，然後在「編輯尺寸」對話方塊中按一下「確定」或按 Enter。
雲形線也可以在自己本身封閉以建立面。
## 編輯雲形線
您也可以在放置的雲形線上按一下右鍵，然後選擇底部的「編輯雲形線」來修改雲形線的點：
此時會顯示「編輯接合」掣點，讓您移動它們。編輯時，新雲形線將以輪廓顯示。
若要完成編輯，請在空間中離開雲形線的地方按一下或按 Esc 結束工具。新雲形線將取代目前的雲形線。
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://windows.help.formit.autodesk.com/zh-tw/tool-library/spline-tool.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.